POINT-TO-POINT WIRELESS BRIDGE ACCEPTANCE RECORD
Companion: https://yenra.com/wireless-bridge/
Prepared September 8, 2026. Planning aid, not installation or regulatory approval.

INSTRUCTIONS
Complete the topology, path and traffic brief before selecting equipment. Use
manufacturer-qualified installation guidance for the exact country and model.
Record actual observations; retain exceptions and rollback information.

Owner / administrator / installer:
Endpoint A / endpoint B (keep sensitive coordinates private):
Distance (meters) / antenna heights (meters) / path-profile reference:
Observed terrain, buildings, foliage and future obstructions:
Fresnel/path-clearance assumptions and verified site inspection:
Exact radio / antenna / firmware / country configuration:
Approved channel and power settings / supporting manual revision:
Power supply or PoE specification at each end:
Mounting, exposure, cable-entry and protection installation evidence:
Router, switches, address assignment and management topology:
VLAN / MTU / multicast / loop-prevention requirements:

TRAFFIC BRIEF
Application / direction / useful rate (Mb/s) / concurrency / peak period:
Latency and interruption tolerance, with source:
Growth/planning allowance and its justification:
Fictional arithmetic: 4 x 6 Mb/s cameras + 20 Mb/s backup = 44 Mb/s.
A hypothetical 25% allowance produces 55 Mb/s in that direction.
This excludes any unlisted traffic and is not a radio capacity prediction.

COPY PER TEST
Date, time, timezone / task / endpoints / duration (seconds):
Bench or installed configuration:
Traffic direction and concurrent applications:
Useful throughput (Mb/s), latency (ms), loss/retries and measurement method:
Application success / exact error / acceptance comparison:
VLAN, management and remote-building client checks:
Approved outage/recovery test: cause / duration / recovery time / app reconnect:
Correction and retest:

ACCEPTANCE
Configuration and installation records retained:
Unresolved limitations / owner / retest trigger:
Accepted service envelope and maintenance owner:
Revisit after obstruction, installation, application or firmware changes.