RFID Smart Cards: Interfaces, Applications, and Compatibility
Working record — September 20, 2026

Guide: https://yenra.com/rfid-smart-cards/

Purpose: Identify the card interface, application, authentication and provisioning requirements that must match the reader system.

Instructions
Work through the steps below with representative evidence. Mark unresolved fields explicitly. Retain source revisions and test records; do not store credentials or sensitive account information in this file.

1. Record reader model/firmware, card family/interface/profile and application software version. Use controlled test credentials.
Notes / evidence:

2. For each combination: detection; application selection; authentication; authorized operation; expected failure; recovery result.
Notes / evidence:

3. Name issuing/profile owner and protected key-management procedure references. Do not enter secret keys or personal credential data.
Notes / evidence:

4. Record new, existing, unprovisioned and replaced/revoked test cards; mode used; unexpected fallback; issue owner and retest evidence.
Notes / evidence:

5. Document multi-application ownership, replacement procedure, retained organizational access and migration acceptance.
Notes / evidence:

Decision / result:

Open issue | Owner | Next action | Due date:

Reviewed by / date:

Source references (check current versions)
https://www.nxp.com/products/MF3DHx3
https://www.nxp.com/docs/en/application-note/AN10969.pdf