CLEANROOM ROBOT — SUPPLIER EVIDENCE AND ACCEPTANCE BRIEF
Yenra | Version 2026-09-07 | https://yenra.com/rbts/clean-room.html

Purpose: compare qualification evidence with the installed process.
The site's qualification lead selects methods and acceptance limits.
Separate airborne particle cleanliness from other product requirements.

Project / owner / revision / product and sensitive surfaces:
Required class, particle sizes, locations and operating state:
Other controls (ESD, moisture, chemical, biological, contact contamination):
Requirement | Method/standard edition | Acceptance evidence | Owner
            |                         |                     |

EXACT CONFIGURATION
Robot model/variant/serial or family definition:
Tool, contact material, load, trajectory, speed and duty:
Software, service routing, consumables and fixture revisions:
Room layout, airflow and environmental conditions:
Cleaning agents/methods approved by supplier:

CERTIFICATE REVIEW
Issuer / report identifier / issue date / validity / verification route:
Named article and unchanged-configuration restrictions:
Test standards and editions:
Payload, motion, pauses and environment:
Sampling arrangement and instrument information:
Difference from intended installation:
Current supporting report requested / response / open items:

HISTORICAL READING EXAMPLE — NOT CURRENT CERTIFICATION
Fraunhofer/KUKA KR 6/10 AGILUS sixx CR document, first issue 2014-11-05:
40% and 80% speed utilization; 6 kg attached load; axes run separately;
one-second pauses; ISO 1 test environment; Class 2 suitability reported.
The document states five-year validity for the named unchanged product.
Use it to practice reading conditions, then request current applicable evidence.
https://www.kuka.com/event/media?itemid=7b255092b52f447e977738327168b2cd

INSTALLED-CELL REVIEW
Tool/product contact and wear:
Cable flexing, rubbing, exhaust and service placement:
Product exposure along incoming-to-outgoing material path:
Cleaning access, maintenance and re-entry:

ACCEPTANCE / CHANGE CONTROL
Agreed test plan, locations, states, instruments and limits:
Background and operating observations with timestamps:
Excursions / investigation / changes / repeat evidence:
Accepted scope and remaining untested conditions:
Configuration baseline / report owner / maintenance triggers:
Example change: adding a vacuum tool and moving hose to an empty-tool
demonstration requires review of the changed configuration and evidence needs.

Primary scopes:
https://www.iso.org/standard/53394.html (ISO 14644-1:2015)
https://www.iso.org/standard/91615.html (ISO 14644-14:2026)
https://www.iso.org/standard/72379.html (ISO 14644-4:2022)