POCKET TAPE MEASURE: FIT-CHECK RECORD
Yenra | https://yenra.com/pocket-tape-measure/
Use one record per location or item. Write units and endpoints for every measurement.
Repeat close measurements. Mark uncertain entries UNVERIFIED. This record helps plan
a fit check; use the product maker's installation and delivery requirements too.

Date / person measuring:
Location / item:
Tape / scale used:
Units (mm, cm, inches, etc.):

AVAILABLE SPACE
Width, endpoints and measuring height:
Other widths checked / limiting width:
Height, endpoints and limiting obstruction:
Depth, endpoints and front limit:
Baseboards / trim / sockets / handles / slopes:
Required operating or installation clearance (source and units):
Space for opening doors or drawers / connecting cables:

PRODUCT
Exact product / model / supplier:
Outside width x height x depth (with units):
Dimensions supplied by seller or measured personally:
Feet, trim or handles included in dimensions:
Packaging dimensions and source:
Manufacturer-approved removable components:

ACCESS ROUTE
Clear doorway openings (actual unobstructed openings):
Turns / stairs / lift restrictions / other obstacles:
Supplier's delivery requirements / route assessment:
Photos or sketch filenames:

DECISION
Nominal clearance in each direction:
Unverified measurements / questions for supplier:
Next action / person confirming:

Worked arithmetic only: 760 mm available width - 740 mm product width = 20 mm
total nominal side space, or 10 mm per side if centered. This alone does not
establish installation clearance or ability to turn through the delivery route.