SLA PART POST-CURING: FOLLOW THE RESIN SCHEDULE AND VERIFY THE PART
Editable planning/verification record — Yenra
Updated: October 2, 2026
Article: https://yenra.com/part-curing/

Purpose: Find the applicable resin/equipment instructions, record the approved wash/dry/cure sequence, and check dimensions and required properties after processing.
Intended reader: Resin-printing technicians and engineers qualifying printed parts

HOW TO USE
Save a working copy. Enter the actual specification, units, assumptions and evidence references in each field. Preserve original observations and record changes. Have the responsible reviewer resolve missing or conflicting requirements before release. Examples below are fictional teaching inputs, not process settings or acceptance standards.

RECORD
1. Part ID/revision, intended use and final acceptance specification:
   ____________________________________________________________

2. Resin name/version/lot, expiry/storage checks and build ID:
   ____________________________________________________________

3. Printer, approved settings and build orientation:
   ____________________________________________________________

4. Applicable technical sheet, safety sheet and post-processing instructions:
   ____________________________________________________________

5. Wash equipment/media condition, actual cycle and draining/drying evidence:
   ____________________________________________________________

6. Cure-unit ID, compatible schedule revision, load arrangement and cycle record:
   ____________________________________________________________

7. Support-removal sequence, finishing and conditioning before inspection:
   ____________________________________________________________

8. Dimension results, instrument and method; required property evidence:
   ____________________________________________________________

9. Interrupted cycles, deviations, disposition and reviewer:
   ____________________________________________________________


WORKED EXAMPLE AND LIMITS
FICTIONAL: A finished bore requirement is 10.00 +/- 0.10 mm, or 9.90 through 10.10 mm. A recorded final measurement of 9.95 mm lies within that dimensional interval under the agreed measurement decision rule. If the required cure-cycle record is missing, dimensional conformance alone leaves the required material condition unverified. Resolve the traceability gap through the approved disposition process; do not invent a repeat-cure recipe.

REVIEW
Prepared by / date: ____________________
Reviewed by / date: ____________________
Open issues, responsible owner, due date: ____________________
Approved next action and evidence: ____________________

SOURCE CONTEXT
These primary references support the linked article. Use exact applicable product, contract, and document versions for operational work.
Formlabs' post-curing guidance
https://formlabs.com/blog/how-to-post-cure-3d-prints/
Formlabs' Rigid 10K instructions
https://formlabs.com/support/Using-Rigid-10k-Resin/

Return to the guide: https://yenra.com/part-curing/