YENRA ROOM MEASUREMENT RECORD
Guide: https://yenra.com/laser-tape-measure/
Purpose: a reusable record for room measurements, not a fitting specification.
Copy into a text editor. Use one copy per room and retain a labeled sketch.

Date / operator:
Room / purpose (estimate, supplier measurement, other):
Instrument model / technology:
Units:
Reference edge (rear, front, tripod, other):
Target and lighting conditions:
Accuracy check performed / known reference / result:

Sketch: label walls A, B, C and D; mark all measurement endpoints.
Dimension | From / to surfaces | Reading 1 | Reading 2 | Accepted value / reason
Length    |                    |           |           |
Width     |                    |           |           |
Height    |                    |           |           |
Other     |                    |           |           |

Resolve inconsistent readings before calculation. Repeatability alone does
not establish accuracy. Follow the instrument's reference-check procedure.

Shape assumptions / recesses / exclusions:
Calculation with units:
Illustrative rectangle: 4.20 m x 3.60 m = 15.12 m2.
Uniform-height example: 15.12 m2 x 2.40 m = 36.288 m3.
These are arithmetic examples, not claims of measurement precision.
Keep supplier waste, pattern-matching and pack allowances separate:
Required fitting tolerance / supplier measurement instructions:
Independent check / unresolved questions:

Follow the instrument's laser safety instructions. Never aim at people or
animals or look into the direct or reflected beam.
Manufacturer reference instructions:
https://www.bosch-professional.com/manuals/professional/gb/en/online-manual/200454011/en-GB/68222421879792386571.html