3D-PRINTED JEWELRY PATTERNS: EVALUATE DETAIL AND CASTING RESULTS
Editable planning/verification record — Yenra
Updated: October 2, 2026
Article: https://yenra.com/3d-printer/

Purpose: Define a representative pattern trial and compare the resulting cast and finished features.
Intended reader: Jewelry workshops and manufacturing buyers assessing printed casting patterns.

HOW TO USE
Save a working copy. Enter the actual specification, units, assumptions and evidence references in each field. Preserve original observations and record changes. Have the responsible reviewer resolve missing or conflicting requirements before release. Examples below are fictional teaching inputs, not process settings or acceptance standards.

RECORD
1. Jewelry design/revision, critical features and final inspection criteria:
   ____________________________________________________________

2. Printer, material name/version/lot, build settings and orientation:
   ____________________________________________________________

3. Support locations, removal sequence and inspection of pattern damage:
   ____________________________________________________________

4. Applicable wash/dry/cure instructions and actual processing record:
   ____________________________________________________________

5. Investment, alloy, flask/loading and supplier-approved casting route references:
   ____________________________________________________________

6. Pattern, as-cast and finished measurements in mm; datum and conditioning:
   ____________________________________________________________

7. Surface/porosity observations, rejected features and finishing time in minutes:
   ____________________________________________________________

8. Changed factor, control samples, repeatability and foundry disposition:
   ____________________________________________________________


WORKED EXAMPLE AND LIMITS
Fictional feature: pattern width 2.10 mm, as-cast width 2.04 mm and finished width 2.00 mm. Observed casting-stage change is -0.06 mm and finishing-stage change -0.04 mm. The total is -0.10 mm. One feature on one route does not establish a global scale factor for every geometry.

REVIEW
Prepared by / date: ____________________
Reviewed by / date: ____________________
Open issues, responsible owner, due date: ____________________
Approved next action and evidence: ____________________

SOURCE CONTEXT
These primary references support the linked article. Use exact applicable product, contract, and document versions for operational work.
Formlabs' Castable Wax instructions
https://formlabs.com/support/Using-Castable-Wax-Resin/?language=en_US
jewelry casting guide
https://formlabs-media.formlabs.com/filer_public/cb/16/cb16362f-506a-4b40-bee3-d67b33aefdf7/castable_wax_casting_guide.pdf

Return to the guide: https://yenra.com/3d-printer/